| CAPACITY | METRIC | IMPERIAL | |
| Distance between centres | 4060 mm | 159.84″ | |
| Swing over bed | 660 mm | 25.98″ | |
| Swing over cross slide | 430 mm | 16.92″ | |
| Swing in gap | 820 mm | 32.25″ | |
| Length of gap in front of face plate | 320 mm | 12.58″ | |
| Centre height | 330 mm | 12.99″ | |
| Bed width | 400 mm | 15.74″ | |
| HEADSTOCK | |||
| Spindle bore | 105 mm | 4.13″ | |
| Spindle nose | D1-11 | D1-11 | |
| Spindle taper in nose | MT8 | MT8 | |
| Spindle taper in sleeve | MT5 | MT5 | |
| Speed range (12-step) | 15 – 1200 rpm | 15 – 1200 rpm | |
| CARRIAGE & COMPOUND | |||
| Cross slide travel | 380 mm | 14.96″ | |
| Compound rest travel | 255 mm | 10.03″ | |
| Leadscrew diameter, thread | ø1 1/2″, 4 TPI | ø1 1/2″, 4 TPI | |
| THREADS & FEEDS | |||
| Imperial pitches 60 Pos | 2-112 TPI | 2-112 TPI | |
| Metric pitches 60 Pos | 0.2-14mm | 0.2-14mm | |
| Diametral pitches 50 Pos | 4-112 DP | 4-112 DP | |
| Module pitches 50 Pos | 0.2-7 MP | 0.2-7 MP | |
| Cross feeds 50 Pos | 0.0185-0.52mm/rev | 0.0007-0.01935″/rev | |
| Longitudinal feeds 50 Pos | 0.037-1.04mm/rev | 0.0014-0.0387″/rev | |
| TAILSTOCK | |||
| Quill diameter | ø75 mm | ø2.95″ | |
| Quill travel | 160 mm | 6.29″ | |
| Quill taper | MT5 | MT5 | |
| MOTORS | |||
| Spindle motor | 15hp | 15hp | |
| Coolant pump | 1/8hp | 1/8hp | |
| GENERAL | |||
| Electrical rating | 600V 20Amp 3Ph 60Hz | 600V 20Amp 3Ph 60Hz | |
| Electrical approval | CSA | CSA | |
| Weight | 3580 kg | 7892 lb | |
| The manufacturer reserves the right to modify the design, specifications and/or colour of the machine without prior notice. | |||
TY-26160
Features :
- Hardened and precision ground gears and bed ways.
- The cross slide is induction hardened to HRC 52° and precision ground.
- The slideways between the saddle and bed are TURCITE B coated, reducing friction and saving on power consumption.
- Two speed tailstock is standard.
